IES-1248-51/51A/53 User’s Guide
172 Chapter 20 IGMP
Figure 84 IGMP Count
The following table describes the labels in this screen.
20.8 IGMP Port Info Screen
Use this screen to display the current number of IGMP-related packets received on each port.
To open this screen, click Advanced Application, IGMP, IGMP Port Info.
Table 39 IGMP Count
LABEL DESCRIPTION
IGMP Status Click IGMP Status to open the IGMP Setup screen where you can view current
IGMP information (see Section 20.3 on page 166).
Port This field shows each ADSL port number.
Active This field shows whether or not the IGMP count limit is enabled on this port. “V”
displays if it is enabled and “-“ displays if it is disabled.
Count Enter the maximum number of IGMP groups a subscriber on this port can join.
This has no effect if the IGMP count limit is disabled.
Select Select this, and click Active or Inactive to enable or disable the specified IGMP
count limit on this port.
Active Click this to enable the specified IGMP count limits on the selected ports.
Inactive Click this to disable the specified IGMP count limits on the selected ports.
Select All Click this to select all entries in the table.
Select None Click this to un-select all entries in the table.
To Next Page
Loading...
