ZyXEL Communications IES-1248-51 - Edit Configuration File; Figure 213 Example: Enter the Management Password; Figure 214 Example: Get the Configuration File Config-0; Figure 215 Example: Close FTP Client

IES-1248-51/51A/53 User’s Guide
Chapter 53 Firmware and Configuration File Maintenance 355
Enter the management password (1234 by default).
Use
get to transfer the configuration file to the computer. The configuration file on the system
(that you want to backup to the computer) is named
config-0.
Quit FTP.
53.3.2 Edit Configuration File
Open the config-0 file via Notepad (see the following example) and edit to a desired
configuration.
Figure 213 Example: Enter the Management Password
Password: 1234
230 Logged in
Figure 214 Example: Get the Configuration File config-0
ftp> get config-0
Figure 215 Example: Close FTP Client
ftp> quit