ZyXEL Communications IES-1248-51 - Figure 286 RPVC Show Command Example; Figure 287 RPVC Delete Command Example; RPVC Delete Command

IES-1248-51/51A/53 User’s Guide
Chapter 56 Virtual Channel Management 413
where
This command lists the PVCs for handling 2684 routed mode traffic (RPVCs).
The following example displays the RPVCs for DSL port 1.
56.7.7 RPVC Delete Command
Syntax:
ras> adsl rpvc delete <portlist> <vpi> <vci>
where
This command removes a PVC for 2684 routed mode traffic.
The following example removes a PVC for 2684 routed mode traffic. It is for DSL port 1, VPI
8, VCI 35.
<portlist> =
The port(s) for which you want to display the RPVCs.
You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
Figure 286 RPVC Show Command Example
ras> adsl rpvc show 1
port vpi vci ip/netmask gateway ip DS/US vcprofile
---- --- ---- ------------------ --------------- ---------------------------
1 8 35 192.168.10.200/32 192.168.10.102 DEFVAL/DEFVAL
<portlist> =
The port(s) of the RPVC.
You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
<vpi> =
The VPI of the RPVC.
<vci> =
The VCI of the RPVC.
Figure 287 RPVC Delete Command Example
ras> adsl rpvc delete 1 8 35