ZyXEL Communications IES-1248-51 - Chapter 50 IGMP Commands; Multicast Overview; IGMP Snoop Commands; IGMP Snoop Show Command

IES-1248-51/51A/53 User’s Guide
Chapter 50 IGMP Commands 327
CHAPTER 50
IGMP Commands
This chapter describes the IGMP snooping and filtering commands.
50.1 Multicast Overview
See Chapter 20 on page 165 for background information on this feature.
50.2 IGMP Snoop Commands
Use the IGMP snoop commands to enable or disable IGMP proxy or IGMP snooping.
50.2.1 IGMP Snoop Show Command
Syntax:
ras> switch igmpsnoop show
This command displays the IGMP mode (proxy, snooping or disabled).
The following is an example.
50.2.2 IGMP Snoop Enable Command
Syntax:
ras> switch igmpsnoop enable <proxy|snooping>
This command turns on IGMP proxy or snooping. Use proxy to have the device use IGMP
proxy. Use IGMP snooping to have the device passively learn multicast groups.
Figure 182 IGMP Snoop Show Command Example
ras> switch igmpsnoop show
IGMP Snooping/Proxy is Disable