IES-1248-51/51A/53 User’s Guide
186 Chapter 24 MAC Filter
Add Click Add to save your changes to the IES-1248’s volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Port These are the numbers of the ADSL ports.
Mode Select Accept to only allow frames from MAC addresses that you specify and
block frames from other MAC addresses.
Select Deny to block frames from MAC addresses that you specify and allow
frames from other MAC addresses.
Active Select this check box to turn on MAC filtering for a port.
MAC This field lists the MAC addresses that are set for this port.
Delete Click Delete to remove a MAC address from the list.
Apply Click Apply to save your changes to the IES-1248’s volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Table 47 MAC Filter (continued)
LABEL DESCRIPTION
To Next Page
Loading...
