ZyXEL Communications IES-1248-51 - Page 240

IES-1248-51/51A/53 User’s Guide
240 Chapter 37 Access Control
overheatOver This trap is sent when the system is no longer overheated. The variable
is the current system temperature in Celsius.
fanRpmLow This trap is sent when the RPM of the fan is too low. The variable is the
current RPM of the fan.
fanRpmNormal This trap is sent when the RPM of the fan is back within the normal
range. The variable is the current RPM of the fan.
voltageOutOfRange This trap is sent when the voltage of the system is out of the normal
range. The variable is the current voltage of the system in volts.
voltageNormal This trap is sent when the voltage of the system is back within the
normal range. The variable is the current voltage of the system in volts.
extAlarmInputTrigger This trap is sent when there is an external alarm input.
extAlarmInputRelease This trap is sent when the external alarm input stops.
thermalSensorFailure This trap is sent when the thermal sensor fails.
adslAtucLof This trap is sent when a Loss Of Frame is detected on the ATUC.
adslAturLof This trap is sent when a Loss Of Frame is detected on the ATUR.
adslAtucLos This trap is sent when a Loss Of Signal is detected on the ATUC.
adslAturLos This trap is sent when a Loss Of Signal is detected on the ATUR.
adslAturLpr This trap is sent when a Loss Of Power is detected on the ATUR.
adslAtucLofClear This trap is sent when the Loss Of Frame detected on the ATUC is
over.
adslAturLofClear This trap is sent when the Loss Of Frame detected on the ATUR is
over.
adslAtucLosClear This trap is sent when the Loss Of Signal detected on the ATUC is
over.
adslAturLosClear This trap is sent when the Loss Of Signal detected on the ATUR is
over.
adslAturLprClear This trap is sent when the Loss Of Power detected on the ATUR is
over.
adslAtucPerfLofsThreshTrap The number of times a Loss Of Frame has occurred within 15 minutes
for the ATUC has reached the threshold. currValue is the number of
times a Loss Of Frame has occurred within the 15-minute interval.
adslAtucPerfLossThreshTrap The number of times a Loss Of Signal has occurred within 15 minutes
for the ATUC has reached the threshold. currValue is the number of
times a Loss Of Signal has occurred within the 15 minute interval.
adslAtucPerfLprsThreshTrap The number of times a Loss Of Power has occurred within 15 minutes
for the ATUC has reached the threshold. currValue is the number of
times a Loss Of Power has occurred within the 15-minute interval.
adslAtucPerfESsThreshTrap The number of error seconds within 15 minutes for the ATUC has
reached the threshold. currValue is the number of error seconds that
have occurred within the 15-minute interval.
adslAtucPerfLolsThreshTrap The number of times a Loss Of Link has occurred within 15 minutes for
the ATUC has reached the threshold. currValue is the number of times
a Loss Of Link has occurred within the 15-minute interval.
adslAturPerfLofsThreshTrap The number of times a Loss Of Frame has occurred within 15 minutes
for the ATUR has reached the threshold. currValue is the number of
times a Loss Of Frame has occurred within the 15-minute interval.
Table 75 SNMPv2 Traps (continued)
TRAP NAME DESCRIPTION