2gig Technologies Go Control - RF Sensor Summary Screen

Installer Programming
©2013 2GIG Technologies Inc. All Rights Reserved.
29
*Onlyusedfor“other”equipment
**Pressinsertforeachword.Toselectfromthe
list,youcanusethekeypadorpressthe←or→
arrows.
RF Sensor Summary Screen
Aftersettingalltheoptionsforasensor,theRF
sensorsummaryscreenisdisplayed.Thescreen
canalsobedisplayedforprogrammedsensors
duringRFsensorprogrameditingbypressingthe
Sumbutton.
•Whilepr
ogra
mmingeachRFsensorremember
thatthe←and→arrowbuonsstepthrough
eachoftheRFsensornumbers.
•Toreturntoprogr
amming,clicktheedit
currentoreditnextbuttons.
• PressingSkipgoe
stoquestionnumberQ‐2
(WiredSensorProgramming).See"Wired
SensorPr
ogrammingOut
line"onpage33.