EasyManua.ls Logo

Aastra AXD

Aastra AXD
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 136 01/2011 Description des sous-ensembles
4.2.4.4 Physical description (Figure 4.5 )
The ADS 300X power supply module is a 7U high, 112mm wide and 316mm deep plug-in
rack, extraction handles excluded. The maximum height of the components above the
PCB is 90 mm.
An "I/O" switch on the front panel is used to power the supply on and off.
The fuse holder is located between the "I/O" switch and the mains outlet.
The ADS 300X is fitted with 2 80mm diameter fans located at the back of the power
supply module.
Connectors
The front panel of the power supply module has:
A mains socket
A 4-pin battery connector
An RJ45 40 V ISDN connector.

Table of Contents

Related product manuals