Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Installation and activation 01/2011 Page 319
6.2.4 Wiring (AXD, AXL, AXS, AXS12 and AXS6)
PRÉSENTATION
On this cabinet, all connections are made on the front panel of the various sub-
assemblies of the cabinet.
CONTRAINTE
• Always use the recommended cable (see section “Installation and wiring
specifications” for each sub-assembly to install: § 4.6 to 4.14).
• Use the correct cable lengths and avoid coiling excess cable inside the rack
• Always label cables and keep a record of the cabling.
To Next Page
Loading...
Need help?
General
