AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 476 01/2011 INSTALLING A5000 SERVER (Non-redundant)
10.7 Additional configurations
10.7.1 Starting and viewing the services
You can configure the services (LDAP, SNMP, GSI, FTP, TFTP, etc.) and display their
status from the "SYSTEM>Configuration>Services" menu of Aastra Management
Portal. See Aastra Management Portal operating manual.
10.7.2 Declaring an NTP time server
It may be necessary to synchronise an NTP server, especially for some terminal types.
The NTP server address can be defined, and NTP activated in the menu
"System>Administration>Date and time", by selecting the tab "Time server
synchronisation protocol".
To Next Page
Loading...
Need help?
General
