Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Maintenance 01/2011 Page 405
7.3 Alarm messages and codes
Error messages sent by the Maintenance and Startup system are displayed by the
Operating system in the logbook. They advise the operator that the software has detected
one of the following events:
• an anomaly detected in the configuration a fault report message is posted in the log. A
fault report can be:
- a software error detected by a software module
- a software errors detected by the operating system
- a software error detected in a memory directory file
- a hardware error detected on a peripheral terminal or card
• fail-safe action initiated and executed by maintenance software. A defence action
report message is posted in the logbook.
7.3.1 Description of errors
TBC
7.3.2 Operating system errors
7.3.3 Programming error codes
7.3.4 Additional error codes
Error
number
Description
Value
(hex)
Error description
To Next Page
Loading...
Need help?
General
