AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 200 01/2011 Description des sous-ensembles
The N0 to N1 interfaces of the EXT1-S6 card have installation details identical to those of
the interfaces of the LN16X card (see Section 4.14.5.5).
The S/T0 to S/T3 interfaces of the EXT1-S6 card have installation details identical to
those of the interfaces of the LD4 card for T accesses (see Section 4.13.2.1) but are
different for S accesses.
Caution: The S/T accesses of the EXT1-S6 card are wired in T. To connect S
peripherals (S sets or DECT base stations), a twisted cable or S0/T0
adaptor (see Figure 4.26 ) is, therefore, required.
To Next Page
Loading...
