Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
Description des sous-ensembles 01/2011 Page 253
Note: Circuit 107 “Data set ready” (PDP or DSR) is not present on the CA1 card. The
straps are not shown in this table.
TABLEAU 4.66 CONNECTING A DTE (CA1) TO A DCE (MODEM OR V24 ADAPTER)
CIRC
T
DESIGNATION DCE DIRECTION
CA1->DCE
CONNECTORS
CA1 CARD
FUNCTION
CCITT: EIA CA1 9-PIN 25-PIN
TE0 to TE3:
104 RD RD NDE 2 3 <--- 3 Received data
103 ED ST/TD NDR 3 2 ---> 1 Transmitted data
108 TDP DTR DTR 4 20 ---> 5 card present output
106 PAE CTS CTS 8 5 <--- 6 flow control input
102 TS GND SGND 5 7 ---> 2 0 V return for junction
output
not wired
not wired
105 DPE RTS RTS 7 4 ---> 7 flow control output
109 DS CD CD 1 8 <--- 8 terminal present input
RET 5 7 4 0 V for junction input
(with V10)
To Next Page
Loading...
Need help?
General
