AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 394 01/2011 Installation and activation
At the end of the procedure, if everything is correct, disconnect the USB key.
6.12.1.5.3Error messages
The following error messages may be displayed when data is being restored on the
compact flash card:
•«Transfer error x " means that an error occurred while data was being copied in
phase x.
•«System error, exit and retry " means that no key is connected or that the
maintenance software cannot execute the restore action.
•«Forbidden function: version in test " means that the software release is not valid.
•«Other transfer in progress " means that automatic TMA actions have not been
completed.
•«Not enough free disk space " means that the space available on the compact flash
card is not enough to contain all the data to be restored.
•«Software restitution failure " means that data was not correctly restored by the
maintenance software.
To Next Page
Loading...
Need help?
General
