AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 424 01/2011 Maintenance
• Remove the fuse holder
located between the “I/O”
switch and the connector.
• Utiliser un outil (par exemple un petit tournevis à tête plate)
comme levier, comme l’illustre la figure suivante :
• Unclip the fuses from the
fuse holder.
• Check the continuity of
the fuses using the
multimeter (W position).
Table 11:
OPERATION DETAILS OF THE OPERATION / COMMENTS
To Next Page
Loading...
