Installation and Maintenance Manual - Aastra 5000 AMT/PTD/PBX/0058/4/6/EN
INSTALLING A5000 SERVER (Non-redundant)01/2011 Page 467
11 Configuring subscriptions
If the answer is "
y", enter the corresponding values for the different fields described
below.
CREATION:
This field may be used to inhibit automatic subscriber creation. This field may take on the
values 0 (= creation inhibited) or 1(= creation authorised).
The numbering length field defined on the previous screen contains the internal number
length to take into account (2 to 6). If this is a valid value, the fields first, last, common
subscriber will not be taken into account. Otherwise, they will be ignored.
FIRST:
This field contains the first internal subscription that can be created automatically.
LAST:
This field contains the last internal subscription that can be created automatically.
FIRST DID:
This field is used to create the external block 0 associated with the internal number block
[first, last]. Authorised characters are " 0123456789ABCDE". For this block to be created,
this number must belong to an incoming number plan.
FIRST PUBLIC DID:
This field is used to associate a public number (format: 0130967000 or
+33(0)130967000) with the DID number for block 0. This ASCII string will be truncated to
20 characters.
AASTRA 5000 CONFIGURATION / Subscribers
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE SUBSCRIBERS (Y/N): Y |
*-------------------------------------------------*
AASTRA 5000 CONFIGURATION / Subscribers
*-------------------------------------------------*
| CREATION: 1|
| FIRST: 3000 |
| LAST: 3999 |
| FIRST DID: 3000 |
| FIRST PUBLIC DID: +33(0)130923000 |
| COMMON SUBSCRIBER: 3500 |
| ADDITIONAL SUBSCRIPTIONS: 40 |
*-------------------------------------------------*
DO YOU WANT TO CHANGE CONFIGURATION Y(ES)/N(O) ? Y
To Next Page
Loading...
