ABB ACQ810 - Page 161

Parameters 161
SpRef used 03.06 SpeedRef used (see page 123). 1073742598
Torq R ef us ed 03.14 Torq ref used (see page 123). 1073742606
Proc PID out 04.05 Process PID out (see page 123). 1073742853
Process act% 04.22 Act val % (see page 124). 1073742870
Pointer Value pointer setting (see Terms and abbreviations on page
109).
-
15.08 AO2 filt time Defines the filtering time constant for analog output AO2.
See parameter 15.02 AO1 filt time.
0.000 … 30.000 s Filter time constant. 1000 = 1 s
15.09 AO2 out max Defines the maximum output value for analog output AO2.
-10.000 … 10.000 V Maximum AO2 output value. 1000 = 1 V
15.10 AO2 out min Defines the minimum output value for analog output AO2.
-10.000 … 10.000 V Minimum AO2 output value. 1000 = 1 mA
15.11 AO2 src max Defines the real value of the signal (selected by parameter
15.07 AO2 src) that corresponds to the maximum AO2
output value (defined by parameter 15.09 AO2 out max).
-32768.000 …
32768.000
Real signal value corresponding to maximum AO2 output
value.
1000 = 1
No. Name/Value Description FbEq
I
AO2
(V)
15.09
15.10
15.11 15.12
15.1115.12
15.09
15.10
Signal (real)
selected by par.
15.07
I
AO2
(V)
Signal (real)
selected by par.
15.07