ABB ACQ810 - Page 212

212 Parameters
35.09 Signal2 max Defines the real value of the selected signal that
corresponds to the maximum display value defined by
parameter 35.13 Proc var2 max.
-32768…32768 Real signal value corresponding to maximum process
variable 2 value.
1 = 1
35.10 Signal2 min Defines the real value of the selected signal that
corresponds to the minimum display value defined by
parameter 35.14 Proc var2 min. See diagram at parameter
35.09 Signal2 max.
-32768…32768 Real signal value corresponding to minimum process
variable 2 value.
1 = 1
35.11 Proc var2 dispf Scaling for process variable 2. This setting also scales the
value for fieldbus.
01 = 1 0
1 10 = 1 1
2 100 = 1 2
3 1000 = 1 3
4 10000 = 1 4
5 100000 = 1 5
35.12 Proc var2 unit Specifies the unit for parameter 04.07 Process var2 (process
variable 2).
0…98 See parameter 35.05 Proc var1 unit.1 = 1
35.13 Proc var2 max Maximum value for process variable 2. See diagram at
parameter 35.09 Signal2 max.
-32768…32768 Maximum value for process variable 2. 1 = 1
35.14 Proc var2 min Minimum value for process variable 2. See diagram at
parameter 35.09 Signal2 max.
-32768…32768 Minimum value for process variable 2. 1 = 1
35.15 Signal3 param Selects a signal to be provided as parameter 04.08 Process
var3.
Speed rpm 01.01 Motor speed rpm (see page 112). 1073742081
Speed % 01.02 Motor speed % (see page 112). 1073742082
Frequency 01.03 Output frequency (see page 112). 1073742083
Current 01.04 Motor current (see page 112). 1073742084
No. Name/Value Description FbEq
35.10
35.13
35.14
35.09
04.07 Process var2
Signal selected by
35.08 Signal2 param