ABB ACQ810 - Page 213

Parameters 213
Current % 01.05 Motor current % (see page 112 ). 1073742085
Torque 01.06 Motor torque (see page 112). 1073742086
Dc-voltage 01.07 Dc-voltage (see page 112). 1073742087
Power inu 01.22 Power inu out (see page 112). 1073742102
Power motor 01.23 Motor power (see page 11 2 ). 1073742103
SpRef unramp 03.03 SpeedRef unramp (see page 123). 1073742595
SpRef ramped 03.05 SpeedRef ramped (see page 123). 1073742597
SpRef used 03.06 SpeedRef used (see page 123). 1073742598
Torq R ef us ed 03.14 Torq ref used (see page 123). 1073742606
Process act 04.01 Act val (see page 123). 1073742849
Proc PID out 04.05 Process PID out (see page 123). 1073742853
Pointer Value pointer setting (see Terms and abbreviations on page
109).
-
35.16 Signal3 max Defines the real value of the selected signal that
corresponds to the maximum display value defined by
parameter 35.20 Proc var3 max.
-32768…32768 Real signal value corresponding to maximum process
variable 3 value.
1 = 1
35.17 Signal3 min Defines the real value of the selected signal that
corresponds to the minimum display value defined by
parameter 35.21 Proc var3 min. See diagram at parameter
35.16 Signal3 max
.
-32768…32768 Real signal value corresponding to minimum process
variable 3 value.
1 = 1
35.18 Proc var3 dispf Scaling for process variable 3. This setting also scales the
value for fieldbus.
01 = 1 0
1 10 = 1 1
2 100 = 1 2
3 1000 = 1 3
4 10000 = 1 4
5 100000 = 1 5
No. Name/Value Description FbEq
35.17
35.20
35.21
35.16
04.08 Process var3
Signal selected by
35.15 Signal3 param