ABB ACQ810 - Page 253

Parameters 253
In start The drive that was started last, and is allowed to be master
by parameter 76.03 Master enable, is the master.
1
76.11 Shared IO enable Determines whether shared signals broadcast on the drive-
to-drive link (if any) are received by the drive.
No Shared signals not received. 0
Yes Shared signals received. The signals received are shown by
parameters 02.43 Shared signal 1 and 02.44 Shared signal
2.
1
76.12 Set as source Determines whether the drive broadcasts shared signals on
the drive-to-drive link or not.
No The drive does not broadcast shared signals. 0
Yes The drive broadcasts the signals selected by parameters
76.13 Shared signal 1 and 76.14 Shared signal 2 as shared
signals on the drive-to-drive link.
1
Const Bit pointer setting (see Terms and abbreviations on page
109).
-
Pointer
76.13 Shared signal 1 Selects a signal to be broadcast as shared signal 1 on the
drive-to-drive link.
AI1 scaled 02.05 AI1 scaled (see page 113). 1073742341
AI2 scaled 02.07 AI2 scaled (see page 113). 1073742343
Proc act 04.01 Act val (see page 123). 1073742849
Pointer Value pointer setting (see Terms and abbreviations on page
109).
-
76.14 Shared signal 2 Selects a signal to be broadcast as shared signal 2 on the
drive-to-drive link.
AI1 scaled 02.05 AI1 scaled (see page 113). 1073742341
AI2 scaled 02.07 AI2 scaled (see page 113). 1073742343
Setpoint 04.02 Setpoint (see page 123). 1073742850
Pointer Value pointer setting (see Terms and abbreviations on page
109).
-
76.15 Share lost actn Defines the action taken by the drive if no shared signals are
received for the time defined by parameter 76.16 Share lost
delay. (This parameter is only effective if parameter 76.11
Shared IO enable is set to Yes.)
Alarm The drive generates an alarm, MF NO SHARED DATA.0
Fault The drive trips on a fault, MF NO SHARED DATA.1
Const speed The drive continues running and adopts the speed defined
by parameter 26.08 Const speed3.
2
Last speed The drive continues running at the last valid reference
received from the master.
3
76.16 Share lost delay Delay for a shared signal loss situation. See parameter
76.15 Share lost actn.
0…3600 s Delay for shared signal loss. 1 = 1 s
No. Name/Value Description FbEq