ABB CRB 15000 - Page 340

NoteAction
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (4 pcs).
Refit the cable bracket with four screws.7
Tightening torque: 0.8 Nm
xx2000001939
Connecting the cabling between the lower arm and swing
NoteAction
xx2000001938
Connect the connectors to each other and snap
them to the cable holders.
1
Cable ties (3 pcs)Secure the cabling with cable ties.2
xx2000001937
Continues on next page
340 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.3 Replacing the axis-2 cabling
Continued