ABB CRB 15000 - Page 494

NoteAction
xx2100000417
Disconnect the brake release cable from the
board.
6
Refitting the brake release unit
NoteAction
O-ring: 3HAB3772-119Wipe, lubricate and fit the o-ring to its groove.1
Grease: 3HAC031695-001Replace if damaged.
Harmonic Grease 4B No.2
Used to lubricate the seals.
xx2100000419
xx2100000420
If not already fitted, place the sheet metal inside
the cover.
2
Continues on next page
494 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued