ABB CRB 15000 - Page 496

NoteAction
xx2100000421
Secure the brake release cable with a cable tie.6
Screws: M3x5 12.9 Lafre
2C2B/FC6.9 (4 pcs)
Refit the brake release unit with the screws.7
Tightening torque: 0.45 Nm.
xx2100000413
xx2100000411
Reconnect the brake release connector DR.X8 to
the drive board.
8
Continues on next page
496 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued