ABB CRB 15000 - Page 502

Refitting the brake release unit
NoteAction
xx2100000092
If not already fitted, place the sheet metal inside
the cover.
1
xx2100000093
Fit the brake release board to the sheet metal.2
xx2100000094
Connect the brake release cable to the board.3
Continues on next page
502 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued