ABB CRB 15000 - Page 503

NoteAction
Screws: M2x6 12.9 Gleitmo 605 (2
pcs)
Fit the brake release cover and secure with two
screws.
4
Tightening torque: 0.2 Nm.
xx2100000095
xx2100000096
Secure the cable with a cable tie.5
Closing the joint unit cover
NoteAction
O-ring: 3HAC061327-047Fit the o-ring to its groove.1
xx2000001962
Replace if damaged.
Continues on next page
Product manual - CRB 15000 503
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued