ABB CRB 15000 - Page 646

NoteAction
Valid for CRB 15000-5/0.95Refit the arm-side interface with four screws.3
Hex socket head cap screw: M3x30
12.9 Lafre 2C2B/FC6.9 (4 pcs)
Tightening torque: 0.45 Nm
Valid for CRB 15000-10/1.52 and
CRB 15000-12/1.27
Hex socket head cap screw: M3x20
12.9 Lafre 2C2B/FC6.9 (4 pcs)
Tightening torque: 0.45 Nm
xx2000002550
Concluding procedure
NoteAction
DANGER
Make sure all safety requirements are met when
performing the first test run. See Test run after
installation, maintenance, or repair on page 90.
1
646 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.6 Replacing the arm-side interface
Continued