ABB CRB 15000 - Page 648

Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Used for CRB 15000-5/0.95.
Also order new attachment
screws for the axis-1 and axis-2
joint unit: 3HAB3413-435 (24
pcs).
3HAC073922-001Base
Used for CRB 15000-10/1.52 and
CRB 15000-12/1.27.
3HAC081047-001Base
M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Used for joint unit of CRB 15000-
5/0.95.
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAB3413-435Flange socket head screw with
glue
M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Used for joint unit of CRB 15000-
5/0.95.
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAB3413-435Flange socket head screw with
glue
For securing joint unit cable.3HAC075545-001Cable tie
For securing joint unit cable.3HAC075545-001Cable tie
Required tools and equipment
NoteArticle numberEquipment
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC077788-001Lifting aid
For joint units on axes 1 and 2 of
CRB 15000-10/1.52 and CRB
15000-12/1.27.
A plate, a beam, a pair of semicir-
cular blocks and attachment
screws M5x30 (2 pcs) are en-
closed.
3HAC087787-001Lifting aid
Continues on next page
648 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the base
Continued