ABB CRB 15000 - Page 888

NoteAction
xx2100000301
Remove the protection plate.4
xx2000002055
Remove the cable support from the drive board
by removing the attachment screws.
5
xx2000002053
Disconnect the two connectors from the torque
sensor board.
• TQ.A
• TQ.B
6
xx2000002049
Remove the cable plate by removing the attach-
ment screws.
7
Continues on next page
888 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.6.4 Replacing the axis-2 joint unit (CRB 15000-10/1.52 and CRB 15000-12/1.27)
Continued