Note/IllustrationAction
xx1800000472
Remove the screws on the bracket.2
Loosen the screw and disconnect:
• K6.X4, K6.X5 - SMB.
3
Installing the harness for double SMB
Note/IllustrationAction
xx1800000727
Remove the attachment screws on the
front cover.
1
Push the harness single SMB into the
cabinet.
2
Take the harness single SMB out from
the upper side.
3
Continues on next page
138 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.1 Installing the harness for double SMB
Continued
To Next Page
Loading...
