Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)
xx1800000476
Fit the axis computer bracket and secure
the screws.
4
Reconnect:
• K6.X11 - A1.X3
• K6.X2 - A2.X9
• K6.X1 - K2.X3
5
Concluding procedure
Note/IllustrationAction
See Refitting the controller covers on
page 227
Refit the covers.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212 .
2
140 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.1 Installing the harness for double SMB
Continued
To Next Page
Loading...
