ABB OmniCore C30 - Page 474

Note/IllustrationAction
Screws: Torx, countersunk screw M4x10 (4
pcs)
xx1800000727
Secure it with the attachment screws.4
Reconnect and secure:
• X2 - X105.
• X2 - X106.
5
Concluding procedure
Note/IllustrationAction
Refitting the controller covers on page 227.Refit the covers.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212.
2
474 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.3.6 Replacing the harness CFI connection
Continued