ABB OmniCore V250XT Type B - Page 133

Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
3
xx2200001817
Installing the 24V terminal block
Note/IllustrationAction
Hang the 24V terminal block to the
bracket and push the lower part until you
hear a clear clicking sound.
1
Continues on next page
Product manual - OmniCore V250XT Type B 133
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.5 Installing the power supply optional device
Continued