ABB OmniCore V250XT Type B - Page 139

Note/IllustrationAction
xx1900001913
Fit the conveyor tracking module and
push the lower part until you hear a clear
clicking sound.
4
xx2200001844
Connect:
• B1.X7 - K4.X1-X5
5
See Application manual - Conveyor tracking.Connect wires to the input and output
connectors as required.
6
Closing the door on page 185.Close the door.7
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
8
For more information about the option Conveyor Tracking, see Application
manual - Conveyor tracking.
Product manual - OmniCore V250XT Type B 139
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the conveyor tracking module (CTM)
Continued