ABB OmniCore V250XT Type B - Page 186

Removing the rear cover
Info/illustrationAction
xx2200001773
Lift off the air filter cover plate.1
xx2200001062
Remove the screws.2
Remove the rear cover.3
Refitting the controller covers
Preparations
Info/illustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Continues on next page
186 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.1 Opening the robot controller
Continued