Note/IllustrationAction
xx2200001064
Cut the cable ties and remove the screws
that hold the fan to the bracket.
4
Refitting the external fans
Refitting the external fans
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
2
xx2200001817
Continues on next page
192 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.2.1.1 Replacing the external fans
Continued
To Next Page
Loading...
