Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)Secure the internal fan attachment
screws.
3
xx2200001071
xx2200001070
Refit the screws holding the fan cover.4
xx2200001069
Refit the screws holding the fan as-
sembly.
5
Reconnect any connectors disconnected
at removal.
6
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
Product manual - OmniCore V250XT Type B 197
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.2.2 Replacing the internal fan
Continued
To Next Page
Loading...
