Note/IllustrationAction
xx2100002282
Insert the fan assembly in the slot on the
power unit.
4
CAUTION
Sharp edges. Make sure the cables are not
damaged.
Reconnect any connectors disconnected
at removal.
5
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
Product manual - OmniCore V250XT Type B 205
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.2.4 Replacing the power unit fan
Continued
To Next Page
Loading...
