ABB OmniCore V250XT Type B - Page 213

Note/IllustrationAction
xx2300001836
Carefully pull the side of the Connected
Services gateway and rotate it tightly to
take it out from the bracket.
2
Removing the sim card
Note/IllustrationAction
xx1900000971
Remove the attachment screws and pull
out the front cover of the Connected
Services-3G.
1
xx1900000972
Carefully pull out the sim card from its
holder.
2
Continues on next page
Product manual - OmniCore V250XT Type B 213
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.4 Replacing the 3G Connected Services gateway
Continued