ABB OmniCore V250XT Type B - Page 214

Refitting the Connected Services gateway
Refitting the sim card
Note/IllustrationAction
xx1900000972
Carefully place the sim card in its holder.1
xx1900000971
Refit the front cover of the Connected
Services-3G and secure the screws.
2
Refitting the Connected Services gateway
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
2
Continues on next page
214 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.4 Replacing the 3G Connected Services gateway
Continued