ABB OmniCore V250XT Type B - Page 219

Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
3
xx2200001817
Disconnecting the antenna
Note/IllustrationAction
Note
The Connected Services antenna is installed
by the customer, and the cable routing can
therefore differ.
Record the cable routing when you re-
move the antenna cable from the cabinet.
1
Continues on next page
Product manual - OmniCore V250XT Type B 219
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.5 Replacing the 4G Connected Services gateway
Continued