Note/IllustrationAction
Screws: Cross recessed cheese head screw
M4x8 (1 pcs)
Fit the power supply to the bracket and
fasten it with screw.
3
Tightening torque: 1.7 Nm±10%.
xx1900001908
Reconnect any connectors disconnected
at removal.
4
xx2200002009
Refit the end clamp besides the power
supply.
5
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
Continues on next page
258 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the power supply
Continued
To Next Page
Loading...
