ABB OmniCore V250XT Type B - Page 261

Note/IllustrationAction
xx2200002012
Hang the power supply into the bracket
and push the lower of it until you hear a
clear clicking sound.
3
Reconnect any connectors disconnected
at removal.
4
xx2200002011
Refit the end clamp besides the power
supply.
5
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
Product manual - OmniCore V250XT Type B 261
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the power supply
Continued