ABB OmniCore V250XT Type B - Page 279

Note/IllustrationAction
Reconnect any connectors disconnected
at removal.
4
Stick the other connector onto the side
of the digital base with the self-adhesive
part.
5
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
Product manual - OmniCore V250XT Type B 279
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.16 Replacing the conveyor tracking module (CTM)
Continued