ABB OmniCore V250XT Type B - Page 324

Note/IllustrationAction
xx1800001748
Disconnect two connectors to the Flex-
Pendant.
5
xx1800001192
Remove the power cable.6
Refitting the power cable and power cable cover
Note/IllustrationAction
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
1
Continues on next page
324 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the power cable and power cable cover
Continued