ABB OmniCore V250XT Type B - Page 325

Note/IllustrationAction
xx1800001193
Refit the power cable.2
xx1800001748
Reconnect the power cable to the Flex-
Pendant.
3
Screws: Torx pan head screw M4x8 (3 pcs)Refit the power cable cover and tighten
the screws.
4
xx1800001196
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
5
Product manual - OmniCore V250XT Type B 325
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the power cable and power cable cover
Continued