NoteAction
See the Connected Services Gateway
configuration in Operating manual - Integ-
rator's guide OmniCore.
For 3G, use a cell phone to test that the
sim card is working.
For WiFi, use a cell phone to verify the
WiFi access.
Note
When testing with a cell phone, use the
same configuration on the cell phone.
11
For 3G and WiFi, check the antenna con-
nectivity.
12
How to replace the unit is described in
Replacing the 3G Connected Services
gateway on page 210.
The Connected Services Gateway may
be faulty, replace it and verify that the
problem is resolved.
13
Related information
All documents can be found via myABB Business Portal, www.abb.com/myABB.
The approval code CMIIT ID is displayed on the nameplate of the product.
402 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
7 Troubleshooting
7.3.8 Troubleshooting the 3G Connected Services gateway
Continued
To Next Page
Loading...
