ABB OmniCore V250XT Type B - Page 418

Ethernet switch, DSQC1088
xx2300000968
DescriptionName
Shows the Ethernet switch board
status:
• Off: All Ethernet ports in Power
Off state.
• Green: Ethernet ports are con-
figured and enabled.
PWR (Power) LEDA
• Flashing: The Ethernet is active
on link.
• Solid: A LAN link is established.
• Off: A LAN link is not estab-
lished.
Link/activity LED (Yel-
low):
B
• Off:10 Mbps data rate is selec-
ted.
• On:100/1000 Mbps data rate is
selected.
Speed LED (Green):C
Safety board, DSQC1087
xx2300000501
DescriptionName
FlexPendant power output LED can be used
to identify the following status:
• No color: FlexPendant power output
voltage is not in normal range.
• Green, solid: FlexPendant power out-
put voltage is in normal range.
FlexPendant power output
LED (green)
HMI
Motors_ON LED can be used to identify the
following status:
• No color: Motors_ON function is off.
• White, solid: Motors_ON function is
on.
• White, flashing: safety loop is open,
for example after an emergency stop.
Motors_ON LED (white)MON
Continues on next page
418 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
7 Troubleshooting
7.3.11 Troubleshooting the main computer
Continued