5-4
CELL-DYN
®
3200 System Operator’s Manual
9140181H—October 2001
Operating Instructions
Data Module Program Overview
Section 5
Figure 5.1 Main Menu Screen
NOTE: The cursor is positioned at the <Operator ID> field when the MAIN MENU
screen is displayed. An operator ID of up to three alphanumeric characters
may be entered. (An operator ID may also be entered from the main
CALIBRATION screen.) This operator ID will be displayed on all screens
and printed on all reports.
The Status Box is displayed in the top center of the screen. This box appears on
every screen to show the following:
Menu in use
Analyzer status
Other applicable information such as file identity, Sample ID number, and any
existing fault conditions
The MAIN MENU key labels are displayed across the bottom of the screen.
Feb 23, 2001
To Next Page
Loading...
