Abbott CELL-DYN 3200 - Sample Loader; Overview

CELL-DYN
®
3200 System Operator’s Manual
13-1
9140181K—July 2002
Section 13 Sample Loader
S
ect
i
on
13
S
amp
l
e Loa
d
er
Overview
The Sample Loader for the CELL-DYN 3200SL is an automated microprocessor-
based sample-handling system designed to be attached to the Analyzer
(see Figure 13.1). The Sample Loader delivers mixed blood samples to the
Analyzer for analysis and communicates sample identification information and the
loader’s operational status to the CELL-DYN 3200SL. The sample tubes, in an
upright position, are transported in racks. Up to 50 tubes can be loaded onto the
Sample Loader and processed with or without bar code labels.
The Sample Loader has been designed to provide fast and efficient throughput of
patient samples. Used in conjunction with the Work List and Bar Codes, the
Sample Loader can process approximately 70 samples per hour, including
matching patient demographic information with samples results and storing
completed sample information in the Data Log.
Figure 13.1 Analyzer With Sample Loader