Abbott CELL-DYN 3200 - Parts List; Overview; CELL-DYN 3200 Accessories

CELL-DYN
®
3200 System Operator’s Manual
B-1
9140181K—July 2002
Appendix B Parts List
A
ppend
i
x B Parts L
i
st
Overview
This section gives a lists the part numbers of components, accessories, controls,
reagents, and consumables associated with the CELL-DYN 3200 System for user
convenience when placing orders.
To place an order for these products, dial our toll-free Customer Service Network
at 1 (800) 323-9100.
If you require technical assistance for your CELL-DYN System, contact the Abbott
Hematology Customer Support Center at 1 (800) CELL DYN (1-800-235-5396).
CELL-DYN 3200 Accessories
* Available only to Abbott Personnel.
Table B.1 CELL-DYN 3200 Accessories Kit (List Number 04H61-01)
Part/List
Number
Quantity Name Description
*89520877-01 1 Cable, Interface (Data Station) For communication between Data
Station and Analyzer computer
20005-01 1 Cable, Interface (printer), 6' For communication between Printer
and Data Station computer
*8240051601 2 Cable, Power, 6'7" For Analyzer
5100165 2 Fuse, 8-amp T (Slo-Blo) Analyzer, 110 VAC
*8510016401 2 Fuse, 4-amp T (Slo-Blo) Analyzer, 220 VAC
06H65-01 1 kit Reagent Line Kit See Reagent Inlet/Waste Outlet
Tubing Kit for individual tubing
information
91485-01 1 pkg Tubing set, Transfer Pump Package of one Transfer Pump
Tubing Assembly
03H96-01 1 pkg Ring, Pull Solenoids Ring for Pulling Solenoid Pinch
Valves
21704-01 1 Plug, Dummy For disabling waster sensor when
waste is routed to external drain
06H92-01 1 pkg Diluent/Sheath Filter (Pkg of 6)
Millipore
®
filter for Diluent/Sheath
pathway
N/A 1 Paper (printer)
9130556 1 Tubing (600" roll)
Tygon
®
Tubing (1/4" ID, 3/8" OD)
N/A 1 Mixing and Handling Inserts
92532-01 1 Serial Loop-Back Device (RS232) For testing the Laboratory
Information System (LIS)